Thunderhill work shop instructional video (for Billetman)(and Eddie)

Wretch

amazingly graceful
Joined
Feb 1, 2002
Messages
32,755
Location
is overrated
I almost fell off my chair, thankfully I had a sky hook in my front shirt pocket and was able deploy it just in time to catch myself.
 
OP
maui

maui

Big Bore diggidy mayhem
Joined
Dec 12, 2001
Messages
29,848
Location
see above
You're doing it too fast. That'll never take. 9V laser devices need at least a full second of time-on-target sizzlin' to get any results.

Star of David pattern is what you use.
sorry, the little mermaid video was about to start and Shaivo got excited
 

DungBeatle

Scarabaeidae Scarabaeinae
Joined
Dec 31, 2004
Messages
8,787
That's not going to work! You have to tape the nuts or they will frieze up!
 
OP
maui

maui

Big Bore diggidy mayhem
Joined
Dec 12, 2001
Messages
29,848
Location
see above
yeah so Shaivo said the spikey looking round thing is part of the engine driver system going to the back tires but it only goes on one way and if you put it on the other way then it goes less frequently then it did be fore so we were being really careful not to over work harden the little spiny things cause they need to free wheel on the spikey thing to keep the round part going well so we locktited the never seaze in an unconditional metric.

Thats a direct quote from Shaivo, who speaks in really long sentences or at least what he told me, er sumting
 
OP
maui

maui

Big Bore diggidy mayhem
Joined
Dec 12, 2001
Messages
29,848
Location
see above
so when I watch Shaivo working on Dino's motorcycle brakes, which I though worked fine before he started... is it normal for there to be more left over parts than when he started?
 

Wretch

amazingly graceful
Joined
Feb 1, 2002
Messages
32,755
Location
is overrated
Well, the wheels have come off this thread, to be sure.

I'm thinking we could be ready to write some technical manuals for the industry now.
 

Stetson

BAMF
Joined
Nov 17, 2002
Messages
9,286
Location
Maine
so when I watch Shaivo working on Dino's motorcycle brakes, which I though worked fine before he started... is it normal for there to be more left over parts than when he started?
I once did a brake job on my big-block suburban. Got everything all put away, went for a two mile test drive, came back home and noticed my glass mason jar, half-full of brake fluid was still sitting/balancing on the left front control arm, rubber tube going up to the bleeder, with my closed end wrench still on it.:eek: Didn't spill a drop.
 
OP
maui

maui

Big Bore diggidy mayhem
Joined
Dec 12, 2001
Messages
29,848
Location
see above
Define "normal".
this

I once did a brake job on my big-block suburban. Got everything all put away, went for a two mile test drive, came back home and noticed my glass mason jar, half-full of brake fluid was still sitting/balancing on the left front control arm, rubber tube going up to the bleeder, with my closed end wrench still on it.:eek: Didn't spill a drop.
 
OP
maui

maui

Big Bore diggidy mayhem
Joined
Dec 12, 2001
Messages
29,848
Location
see above
Big willow
April 25&26 at the streets of willow would be more likely. So far all the big willow days I see are single days which for me is a non starter. Plus I've never rode the streets side.

[edit] sept 12&13, 2 days at big willow
 
Last edited:

Dino

wrist twister...
Joined
Dec 31, 2001
Messages
2,603
Location
Oregon
I'm looking forward to your next video. I can't believe I've never used this process and I'm a pretty thorough kinda' guy. Can this method be used on carbonater mannyflowed bolts?
 

Snail

BAMF. No. Really. As BAMF as they get.
Joined
Jan 25, 2002
Messages
19,276
Location
Oregon
They run off the same sprocket. Would the laser process harden a limeys teeth?
 
OP
maui

maui

Big Bore diggidy mayhem
Joined
Dec 12, 2001
Messages
29,848
Location
see above
I’m not exactly sure what that part was, it was left over after we were finished working on Shaivo’s bike
 
OP
maui

maui

Big Bore diggidy mayhem
Joined
Dec 12, 2001
Messages
29,848
Location
see above
well I think it's best if I include this video I did for Eddie here. For Shiavo's sake...also Billetman might be missing out. I swear one of these days I should learn how to edit, to make higher quality...uh....yea what ever

 

Vegas12

BAMF+
Joined
Aug 10, 2005
Messages
14,670
well I think it's best if I include this video I did for Eddie here. For Shiavo's sake...also Billetman might be missing out. I swear one of these days I should learn how to edit, to make higher quality...uh....yea what ever


Since your process added not only length but also girth to the various hardware, would that system also work on other....ahem...."parts"??

Asking for a friend...
 
Top Bottom