07 CBR 600 rear axle

maui

Big Bore diggidy mayhem
Joined
Dec 12, 2001
Messages
32,638
Location
see above
I'm trying to figure out if the spare pit bull trailer restraint pins I have fit a 07 CBR 600.

Left pin is .910" (23.11mm)
Right pin is .625" (15.875mm)
There's 12 5/8" (320mm) between the two shoulders as mounted.

for those unfamiliar with this set up the pins have to fit fairly well inside of axle.
72055
 
  • Red
Reactions: Red
OP
maui

maui

Big Bore diggidy mayhem
Joined
Dec 12, 2001
Messages
32,638
Location
see above
  • Thread Starter
  • Thread Starter
  • #3
Why didn't they just run a solid bar all the way thru?
there is another system which is a through bar version so possible patten infringement I would guess.

600rr axle I think 05-20 is the same size, the ID from both ends is the measurements I need, overall length would be good too.
 
Top Bottom